Cutting Machine in Operation at the Pocahontas Exhibition Mine, Pocahontas, Va.
Date:
undated
Description:
Cutting machine in operation at the Pocahontas Exhibition mine, Pocahontas Va. on the Norfolk and Western Railway. 'Permission is granted to reproduce this photograph only on condition that all reproduction shall bear the following credit line: Photograph by Norfolk and Western Railway.'
Two miners work with a cutting machine at Mine 206, Kentucky. 'This material is the property of the Consolidation Coal Co. and must be returned promptly to: Advertising Department, Consolidation Coal Company, 30 Rockefeller Plaza, New York, N.Y.
'This very coarse lumpy mine run coal is the result of proper shooting. The miner is paid on a tonnage basis for loading this coal into mine cars. He is required to watch his coal carefully as he loads it and see that no impurities become mixed with the coal.'
Pennsylvania Coal Mine Breaker Boys Posing on a Mule
Date:
ca. 1902-1903
Description:
Pennsylvania coal miner boys posing on mule. 'This photoprint is issued by the State Historical Society with the understanding that it is for one time use only, if additional written permission is obtained. It may not be sold or redistributed, copied for resale or distribution as a photoprint, used as agency stock, or used in any other enterprise. It may not be transferred into other hands nor to another combination of interests for republication. Refer requests for use back to the Society, citing negative number if shown. Credit to State Historical Society of Wisconsin.'
Shuttle Car at Mine No. 32, Consolidation Coal Company, at Owings, W. Va.
Date:
1950/10
Description:
Miner driving a shuttle car. 'Shuttle car, fully loaded, rumbles around a curve on its way to the loading terminal where it will unload into mine cars. Such mechanized equipment has a unit cost of about $20,000. Mine No. 32, Consolidation Coal Co., Owings, W. Va.'
Two miners operate a cutting machine. 'Credit must be given to Willaim Vandivert, 21 East Tenth St., New York 3, N.Y., Not to be reproduced without written liscense.'
'White Oak preparation begins when the machine leaves and the miner is ready to shoot down his coal. The shooting inspector on the left has not only located the hole for the miner to drill, but instructed him as to what angle he must bore his hole to contain the necessary explosive used in dislodging the coal from the seam. The kerf made by the cutting machine is plaining visible in this picture and you will note the cuttings of bug dust have been removed before the coal is shot. The length of the auger used by the miner and the width of the bit which determines the size of the hole bored, is also carefully regulated.'
'All White Oak mines are electrically equipped and of course this mining machine is operated by electricity. The machine is mounted and transported on a specially designed truck and moves under its own power from one working place to another. It is taken from the truck by the machine operator and his helper and moved to the place of the coal and place in cutting position as you see it in this picture. The machine consists of an endless chain with 'bits' inserted, which act as cutters. The machine cuts a 'kerf' or hole along the bottom of the coal about 4 inches high and extending back six feet under the coal. The fine coal made by this machine is what is commonly known as 'bug dust.' Cutting machines are operated at night and each machine is capable of cutting twenty places on each shift. These machines are operated on tonnage basis and these operators earn high wages.'